NovaStar MX40 Pro Flagship All-in-One LED Controller Video Processor

Description

Certifications
CCC, CE, FCC, IC, UL, CB, KC, EAC
If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

Inputs and Outputs

• 3 types of inputs
  • 3x HDMI 2.0 (with loop through)
  • 1x DP 1.2
  • 1x 12G-SDI (with loop through)
• 12-bit, 10-bit and 8-bit video inputs
• 3 types of outputs
  • 20x Gigabit Ethernet ports, load capacity up to 9 million pixels
  • 4x 10G optical ports, supporting setting of output mode. Users may choose between 20- port mode and 40-port mode.
  • 1x SPDIF digital audio port
• 3 types of controls
  • 1x Genlock signal input (with loop through)
  • 2x Ethernet control ports
  • 1x Auxiliary port

Advanced Features

• 4 independent layers Support up to 4x 4K layers and layer priority adjustment in Z order.
• Image scaling Support 4 image scaling modes: custom, pixel to pixel, snap to canvas, and fill screen.
• Color Replacement Support free replacement of any color on the image without affecting the performance of other colors. Replacement of highly saturated colors is recommended for better effect.
• 14Ch Color Correction Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colors of the red, green and blue primary colors.
• Curves Support adjustment to the image RGBW mapping curves.
• 3D LUT Use the 3D LUT file (.cube) with an accuracy of 17×17×17 / 33×33×33 / 65×65×65 to adjust the colors of the video source.
• Dynamic Booster Real-time analysis and dynamic adjustment are made to each frame to significantly improve the display contrast and image details for better visual experience, and effectively control and lower the display power consumption, extending the service life of the LED screen.
• Full Grayscale Calibration Work with NovaStar’s high-precision calibration system and C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity of each grayscale and dramatically improving the image quality.
• 3D Work with 3D emitter and 3D glasses to bring a fascinating and immersive 3D viewing experience.
• HDR
  • Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards.
  • Support HLG.
• Latency
  • Support low latency and the controller load capacity is not reduced. The latency at the controller is 0 frame (less than 1 ms) in SendOnly Controller working mode and 1 frame in All-In-One Controller working mode.
  • Support additional latency. Zero to two frames of latency can be added at the controller.
• Preset For optimal display in various scenarios, users can adjust display parameters such as layers, brightness, color temperature, and gamma ahead of time and save them as presets. Users can save up to 128 customizable presets which can be easily applied or switched with just one click.
• No rectangle restriction No rectangle restriction for irregular screens. When calculating resolutions, blank pixels do not count towards the total capacity. The used load capacity of Ethernet ports is the sum of the pixels of all cabinets.
• Frame Rate Adaptive Automatically adapt to video inputs with different frame rates ranging from 23.98 Hz to 240 Hz, and support the automatic calculation of optimal screen parameters based on the input source’s frame rate. This ensures that the brightness deviation of the screen remains within 5% across different frame rates. It also supports precise frame rate adjustment in 0.01 Hz increments.
• Two working modes Support the All-In-One Controller and Send-Only Controller working modes.
  • In the Send-Only Controller mode, the latency can be reduced by one frame.
  • In the All-In-One Controller mode, the layer and scaling functions are available.
• Shutter Fit Automatically adjusts the driver IC parameters according to the camera shutter angle to fix problems of black lines, grayscale addition, and grayscale loss during camera shooting in xR scenarios.
• Frame Multiplication
  • Frame interpolation: Outputs images that are captured from multiple shooting angles with different backgrounds at the same time. Solid green backgrounds can also be inserted to allow for easy post-production adjustments.
  • Frequency multiplication: Supports high frame rates of up to 240 Hz. This feature is to accommodate multi-angle camera shooting to improve the screen performance under the camera.