NovaStar MX30 All-in-One LED Controller Video Processor

Description

Certifications CE, FCC, IC, UL, CB, PSE

If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

Inputs and Outputs

• Multiple types of inputs
  • 1x HDMI 2.0 (with loop through)
  • 1x HDMI 1.4 (with loop through)
  • 1x DP 1.1
  • 2x 3G-SDI (with loop through)
• 10-bit and 8-bit video inputs
• 3 types of outputs
  • 10x Gigabit Ethernet ports, load capacity up to 6.5 million pixels
  • 2x 10G optical ports
  • 1x SPDIF digital audio port
• 3 types of controls
  • 1x Genlock signal input (with loop through)
  • 2x Ethernet control ports
  • 1x Auxiliary port

Advanced Features

• 3 independent layers Support up to 3 layers and layer priority adjustment in Z order.
• Image scaling Support 4 image scaling modes: custom, pixel to pixel, snap to canvas and fill screen
• 14Ch Color Correction Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colors of the red, green and blue primary colors.
• Full Grayscale Calibration Work with NovaStar’s high-precision calibration system and the C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity of each grayscale and dramatically improving the image quality.
• HDR − Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards. − Support HLG.  Latency − Support low latency and the controller load capacity is not reduced. The latency at the controller is 0 frame (less than 1 ms) in SendOnly Controller working mode and 1 frame in All-In-One Controller working mode. − Support additional latency. Zero to two frames of latency can be added at the controller.
• Preset For optimal display in various scenarios, users can adjust display parameters such as layers, brightness, color temperature, and gamma ahead of time and save them as presets. Users can save up to 128 customizable presets which can be easily applied or switched with just one click.
• No rectangle restriction No rectangle restriction for irregular screens. When calculating resolutions, blank pixels do not count towards the total capacity. The used load capacity of Ethernet ports is the sum of the pixels of all cabinets.
• Frame Rate Adaptive Automatically adapt to video inputs with different frame rates ranging from 23.98 Hz to 240 Hz, and support the automatic calculation of optimal screen parameters based on the input source’s frame rate. This ensures that the brightness deviation of the screen remains within 5% across different frame rates. It also supports precise frame rate adjustment in 0.01 Hz increments.
• Two working modes Support the All-In-One Controller and Send-Only Controller working modes. − In the Send-Only Controller mode, the latency can be reduced by one frame. − In the All-In-One Controller mode, the layer and scaling functions are available.